Giantz
Portable Battery Sealed Marine Solar AGM 4WD 135Ah - 12V
Portable Battery Sealed Marine Solar AGM 4WD 135Ah - 12V
Couldn't load pickup availability
Specifications & Features:
-Overall dimensions: 39.4cm x 11cm x 28.6cm
-Screw: M8 screw, 8mm diameter, 16mm length
-Terminals: Bolt-down, F5
-Approx weight: 32KG
-Nominal voltage: 12V
-Rated capacity (10 Hour Rate): 135Ah
-Maximum cycle lIfe: 1600 Cycles
-Internal resistance: Approx. 4.3m?
-Maximum discharge current: 1100A (5s)
-Operating temperature range:
-Discharge: -15?C to 50?C
-Charge: 0?C to 40?C
-Storage: -15?C to 40?C
-Capacity affected by temperature: 40?C = 103% | 25?C = 100% | 0?C = 85% | -15?C = 65%
-Cycle use:
-Initial charging current less than 35A
-Voltage 14.4 - 15V @ 25?C
-Standby use:
-No limit on initial charging current
-Voltage 13.5 - 13.8V @ 25?C
-Slim design
-Deep cycle battery
-Greater cycle life
-Max. cycle life of 1400 cycles
-Industry-leading build life
-Higher sulfation resistance
-Longer storage life
-Maintenance-free
-Superior deep discharge recovery
-Better low temperature performance
-High oxygen-recombination efficiency
-Advanced AGM technology
-Non-spillable, leak-proof and non-gassing
-Bolt down terminals Convenient carry handle
-Please charge the battery on receiving it even though the battery will not be used in the near future.
-Maintenance-free means the terminals need not be refilled. However, the battery must be recharged periodically after use.
-It is advised to charge the battery every 3 months if not in use for long periods. This is to prevent over-discharging of the battery which will cause irreparable damage to it.
-AGM deep cycle batteries have a much longer cycle life if they are exhausted to a small degree and then recharged, rather than draining all their power and recharge all the away.
Package Inclusions:
-1 x Deep Cycle Battery
Notes:
-The colors depicted on your computer monitor may differ from the actual colors due to variations in monitor display.
-Product sizing may vary slightly due to the nature of the manufacturing process and manual measurement.
Share
