What are Specifications: -Material: ABS -Weight: 29g -Size: 10 x 4cm -Colour: Green, Blue, White
What is Description: -Convenient to pull and insert, sliding smoothly, stable and durable. -It can be used in both horizontal and vertical directions, with stronger applicability. -Strong adhesive, good load-bearing, no need to worry about falling off. -Easy to install, suitable for most smooth surfaces. -100 Percent Satisfaction: Any further question about it, please feel free to contact us.
Steps to Use: -Wiping the wall then tear off the acrylic glue. -Cleaning the wall then stick the holder on wall. Press holder to remove bubble of adhesive. -Removing the secondary buckle then paste on the power strip. -Inserting the power strip on the wall.
Note: -Before using, please clean the wall and power strips well and press the holder. -Please press the holder to remove the bubble of adhesive, this will help to stick the holder in wall better. -Please do not get the adhesive into the water or its stickiness may be weakened then it is very hard to stick again. -If you want to remove the holder, please heating the adhesive up to soften it by using a blow dryer or heat gun, you can remove the holder without leaving residue in this way. -We advise not to stick on the lime wall, or the stickiness will be weak then the holder may drop out from the lime wall in a short time.
What in the Box: -1 x Plug Holder Socket Organizer
Notes: -The colours may vary slightly depending on different monitor displays. -Please allow for minor discrepancies due to manual measurement.
